A Private House
|The building looks characterization||2|
|Construction description of the parts (basics)||3|
|Construction description of the (floor)||4|
|Construction description of the part (wall)||5|
|Construction description of the parts (ladders, covering)||6|
|Construction description of the part (roof )||7|
|Construction description of the part (finishing)||8|
|Construction description of the part (windows and door)||9|
|Pros and cons of building||11|
Soil surface consists of soil, but underneath it is a sandy loam layer. Groundwater level 1.9 m below ground surface. Basics of strip of cast concrete. Under the load-bearing walls of the building is Reinforced concrete foundations with a concrete class B30. Foundation construction depth of the external walls are 2 m. Basics construction depth of the internal walls is 1.27 m. Base concrete concrete worker, concrete sack pear-shaped electric mixer.
The floor on the bottom. Plank floor (37mm). Sleepers (50x50mm). Insulation (25mm). Insitu concrete (80mm). Insulation layer (80mm). Compacted soil (200mm).
Bearing wall construction consists of a 120 mm thick brick row and 250 mm brick row, middle Paroc 85mm insulation. Bearing walls strawberries bricklaying and insulation is laid auxiliary worker. Load-bearing walls insulation is laid between the garage and the house is 38cm thick (half brick), because the garage is not heated. But the rest of the load-bearing partition walls are 25cm thick (one brick). Partitions are made up of gypsum board 200mm thick. Bulkhead mounted lineman.…
Enter an email address where the link will be sent:
Link to paper: